Trade Show Announcement: Die Casting Congress & Tabletop

Sep 10 2017, by Transmet Corp in News & Events

2017 Die Casting Congress & Tabletop Logo Via Diecasting.org

Are you joining Transmet and the North American Die Casting Association (NADCA) in Atlanta?

Visit us in Booth #345 to discover how die casters are improving the shot blast step with Transmet Cast Zinc Shot, Cast Aluminum Shot, and Stainless Steel Grit.

Aluminum die cast parts, zinc die cast parts, and magnesium parts have shown to benefit from an improved surface finish on parts and reduced damage to blast equipment.

Transmet Corporation booth will have Cast Zinc Shot, Cast Aluminum Shot, and Stainless Steel Grit media available at the Die Casting Congress & Tabletop

Transmet Blast Media for Die Casting

Transmet manufactures and supplies high durability, long-lasting Shot that does not damage parts or equipment. We work with aluminum die casters, zinc die casters, and others to improve surface finish, lower cycle times, and generally improve the casting appearance.

 

Die Casting Surface Finish Examples

The fins on this Aluminum Die Casting warped when blasting with hard steel shot.  We were able to blast the thin-walled part without warping by using our Cast Zinc Shot:

Aluminum Die Cast Part Previous Warping of Fins From Steel Shot Now Blasted With Cast Zinc Shot

 

Here is an example of a Zinc Die Casting company having delamination problems caused by a shot blasting step using hard steel shot. Problems were discovered in later paint steps caused by the exposed porosity on the casting surface.

Cast Zinc Shot was able to remove flash and achieve surface finish specs without the delamination problem:

Zinc Die Cast Part Blasted With Transmet Cast Zinc Shot After Previous Delamination Issues From Steel Shot

 

See Reduction In Damage From Inside The Blast Wheel

Cast Shot significantly reduces damage and wear on internal machine components. See what this looks like from inside the machine, with a blast wheel that has clocked over 17000 hours of blasting with Transmet Cast Zinc Shot:

This blast wheel has over 17000 hours of blasting with Transmet Cast Zinc Shot without damage

 

 

About the Show

From the North American Die Casting Association (NADCA) website:

The 2017 Die Casting Congress & Tabletop will be held September 18-20, 2017, at the Atlanta Convention Center at the AmericasMart in Atlanta, GA. This three day event will feature more than 100 exhibitors ready to highlight their latest and greatest products and technology.

Over 30 Congress presentations will be given by experts from around the world on topics such as computer modeling, process engineering, advanced technology, additive manufacturing and a special Global Trends spotlight session, just to name a few. These presentations will expose metalcasters to the latest technology, ongoing research and successful management tools that will assist companies in enhancing their competitiveness.

Winners of the International Die Casting Design Competition will be on display and honored as well as the Die Casting Industry Award winners.

 

Location

AmericasMart Atlanta
240 Peachtree St NW
Atlanta, GA 30303

Hours

Monday, September 18th

  • Exhibit 10 – 5
  • Congress 8 – 3:30

Tuesday, September 19th

  • Exhibit 10 – 5
  • Congress 8 – 3:30

Wednesday, September 20th

  • Exhibit 10 – 2
  • Congress 8 – 3:30

 


Will You Be in Atlanta?

Get in touch with us if you will also be at the show. Click the link below and be sure to stop by Booth # 345.

Contact Us